Pro duct7-manufacture,factory,supplier from China

Particle Board Advantages1) tight creation and high strength2) minimum twisting, delamination or warping3) no rotten or decay, sturdy in opposition to corrosion and fireplace4) water evidence, steady while exposed within the herbal or moist surroundings5) low formaldehyde emission6) ideal nailing strength, clean to be sawn, nailed, drilled, grooved, planed, filed or polished7) precise warm temperature and sound resistant, clean to be covered8) presenting manufacturing record9) supplying check record10) competitive cargo11) aggressive after-sales serviceParticle board detailsSize1220*2440mmThic

Particleboard AdvantagesA. Good sound-absorbing and sound-insulating performance; Particleboard is heat-insulating and sound-absorbing;B. The interior is granular with a cross-staggered structure, the performance of each part is basically the same, and the lateral load-bearing capacity is relatively poor;C. The surface of the particle board is smooth and can be used for various veneers;D. In the production process of particleboard, the amount of glue used is small, and the environmental protection factor is relatively high.Particleboard DisadvantagesA.

Particle Board Details.Size1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code44101200Production Capacity30000 Cbm Monthly

1.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. This kind of man-made board is often used in interior decoration.Xinhua Wood Storage  Quality Certificates  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.

    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board.

     The basic unit of fiberboard is separated wood fibers or fiber bundles. The raw materials for fiber production mainly come from forest cutting residues, such as branches, shoots, small diameter wood, etc; And wood processing residues, such as board edges, shavings, sawdust, etc. In addition, the wastes from chemical processing of forest products (such as tannin extract and hydrolytic residues) and other plant stems can be used to produce fibers. The fiber content of coniferous wood is high, and the fiber length is 30-50% longer than that of hardwood.

     Particleboard, also known as chipboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive.

Uses of Particleboard1. As a base material: Industrial grade particleboard is suitable as a base material for veneer, and many veneer materials are available. Particleboard has uniform density, small thickness tolerance, and smooth surface, which is a good veneer substrate.2. Kitchen cabinets: Particleboards can be used as cabinet shelves, side panels, back panels, drawers, doors and other parts. Particleboards have performance and economic advantages. The grades of kitchen cabinet boards are M- -S, M- -2, M---3.3.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

     Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber by hot pressing after slicing, cooking, fiber separation, and drying, then applying urea-formaldehyde resin or other suitable adhesives.     The biggest advantage of MDF (medium fiberboard) is that it can be used for carving, engraving and milling, so as to make various shapes.

     The Waterproof fiberboard originated in Europe. It is based on the production of ordinary fiberboard and added with a certain proportion of granular moisture-proof particles. The fiberboard made in this way can greatly reduce the degree of expansion after encountering water.             Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.The thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF. The density of MDF is generally It is in the range of 0.5-0.8g/cm³.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

Uses of Particleboard1. As a base material: Industrial grade particleboard is suitable as a base material for veneer, and many veneer materials are available. Particleboard has uniform density, small thickness tolerance, and smooth surface, which is a good veneer substrate.2. Kitchen cabinets: Particleboards can be used as cabinet shelves, side panels, back panels, drawers, doors and other parts. Particleboards have performance and economic advantages. The grades of kitchen cabinet boards are M--S, M- -2, M--3.3.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

Shopping skills of MDF Fiberboard:Environmental protectionAccording to national standards, MDF can be divided into E0, E1, and E2 according to its free formaldehyde content. The formaldehyde emission of E2 grade is ≤5mg/L; the formaldehyde emission of E1 grade is ≤1.5mg/L, which can be directly used for interior decoration; the formaldehyde emission of E0 grade is ≤0.5mg/L.

The difference between medium density fiberboard and particle board is so bigAbstract: There are many types of man-made panels, and many friends are always unclear when they are decorating. Some friends always can't tell the difference between particleboard and density board. In fact, as long as you know the two kinds of boards, it is very simple to distinguish them.1. MDF and particle board materials are differentParticleboard is processed by high temperature and high pressure after the logs are broken, and the wood chips are the main raw materials.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

Advantages of carbon crystal panels in customized home furnishing The carbon crystal plate is made of a PVC film on the base material. The veneer can not only play a decorative role, but also protect the inside of the plate from external erosion, replacing the position of the paint. Therefore, the carbon crystal plate is used in There is no need to paint at all times, which is very convenient and trouble-free.

    Advantages of Carbon Crystal Medium Density Fibreboard:1. High environmental protection performance.The product does not need to be painted after coating, reducing the harm of formaldehyde to human body, and the environmental protection grade is higher than the national environmental protection standard. 2.

High Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fibers or other plant fibers with the application of urea-formaldehyde resin or other applicable adhesives.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.