Pro duct6-manufacture,factory,supplier from China

What is Black MDF ? What advantages does Black MDF have?    Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

The Difference Between Plywood and MDFWood fibers, resins or glues are used to make MDF. These bond together under pressure and heat to form a cardboard. Plywood is made by gluing thin hardwoods between pieces of wood.Plywood is made of solid wood while MDF is made of wood fibers. In manufacturing, there is some waste in plywood production, whereas there is no waste in MDF production.When comparing the two, it can be seen that plywood has attractive grains or knots. However, these particles or nodules are not visible in MDF.Furniture can easily be made from MDF instead of plywood.

MDF Products on show Products detailsProduct:MDFMaterial:Polar Pine Combi HardwoodGlue:MDI WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:6-45mm or accept customizationMOQ:20 CBMDelivery time:15 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsageRoof decking, furniture,packing,hoarding,signboards, portable building, constructional insolation boardQuestions about MDF products.Q 1.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard.

MDF processing performance:Medium density fiberboard can be produced from a few millimeters to tens of millimeters thick, can replace any thickness of wood, square timber, and has good mechanical processing performance, sawing, drilling, slotting, tenoning, sanding and engraving , The edge of the plate can be processed according to any shape, and the surface is smooth after processing.Due to its excellent performance and an effective way to comprehensively and rationally utilize wood, MDF is one of the most promising products at present.Medium density fiberboard features:1.

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

How to deal with the pungent smell of the density board?1） Keep the room ventilated and paint the MDF with anti-mildew paint.Put the density board in a dry place at home, keep the room ventilated, and it can be exposed to the sun if it is severely damp. Go to the market to buy anti-mildew paint and paint the MDF. It can play a certain role in preventing moisture and mildew, but pay attention to the quality of the paint and choose non-toxic and tasteless products.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

      The Invention of Wood-based Panels     The invention of wood-based panels can be traced back to 3000 BC. At the beginning of the 1st century BC, the Romans were already familiar with veneer manufacturing technology and plywood manufacturing principles.     In 1812, the French invented the veneer sawing machine.     In 1834, France issued a planer patent.     After 1844, the improved rotary cutting machine was officially used in industrial production.

Product advantages:Flame retardant density board, its surface is flat and smooth, which is convenient for secondary processing. It can be pasted with rotary cut veneer, wood veneer, painted paper, impregnated paper, etc., and can also be directly painted, printed and finished; it has good mechanical processing performance, sawing, drilling , tenoning, milling, sanding and other processing properties are similar to wood, or even better than wood. The main purpose:1. Used for hanging panels, wall panels, showcase panels, and sound-absorbing panels;2.

Advantages of Carbon Crystal Plates or Black MDFCarbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging and other practical and excellent features, helping you easily have a healthy, environmentally friendly and safe living home.Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation has reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise

Carbon crystal panels have many advantages, including:1. Strong durability: carbon crystal plate has the characteristics of high strength and wear resistance, and can maintain its original performance and appearance in long-term use.2. Ultra-thin and light: the carbon crystal plate is very thin and light in weight, which can reduce the weight of the overall decoration material, and is also easier to transport and install.3.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

Instruction of Waterproof FiberboardWaterproof Fiberboard, also known as fiberboard , is an artificial board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other suitable adhesives.Warehouse  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

     The Waterproof fiberboard originated in Europe. It is based on the production of ordinary fiberboard and added with a certain proportion of granular moisture-proof particles. The fiberboard made in this way can greatly reduce the degree of expansion after encountering water.             Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

    Fiberboard, also referred to as density board, is a timber-primarily based panel made of wood fiber or exceptional vegetable fibers with urea formaldehyde resin or other relevant adhesives. adhesives and/or additives can be carried out sooner or later of manufacturing. fiberboard has the benefits of uniform , small vertical and horizontal power distinction, and isn't easy to crack. it's miles considerably used.

     The basic unit of fiberboard is separated wood fibers or fiber bundles. The raw materials for fiber production mainly come from forest cutting residues, such as branches, shoots, small diameter wood, etc; And wood processing residues, such as board edges, shavings, sawdust, etc. In addition, the wastes from chemical processing of forest products (such as tannin extract and hydrolytic residues) and other plant stems can be used to produce fibers. The fiber content of coniferous wood is high, and the fiber length is 30-50% longer than that of hardwood.

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.

The wood-primarily based panel is fashioned by interweaving lignocellulose fibers and is made of its inherent adhesive properties. adhesives and/or components can be applied for the duration of production.Fiberboard, also called density board, is a wood-primarily based panel made from wood fiber or unique vegetable fibers with urea formaldehyde resin or different relevant adhesives. adhesives and/or components can be applied at some point of manufacturing. fiberboard has the blessings of uniform cloth, small vertical and horizontal power difference, and isn't easy to crack.

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

Product DetailsSize1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code4411142900Production Capacity30000 Cbm Monthly

Fire Resistant MDF Features:1.Excellent flame retardant performance: Comply with the B1-B/B1-C regulations of GB8624-2012 "Classification of Combustion Behavior of Building Materials and Products". 2. Excellent environmental protection performance: the amount of formaldehyde released has reached the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.